HomeMy WebLinkAboutBLD2007-00639 CIB TECH DATA.TIFFeb 11 2008 9:14RM
HP LRSERJET FRX
P.
_)U 7 _,,o
2034 -C Van Buren Ave. a Indian Trail, NC 28079 - Phone: 704.334.8222
Description:
CIB stands for Commercial Insulation Board, This commercial quality product is brought to you by DryDog
Borders primarily for use in the construction of closed crawispaces, CIB is faster and easier to install than other
insulation board products and provides superior performance inside the crowlspace. Use CIB to insulate and
cut down on mechanical noise inside the crowispace, give a clean finished look, cut down on installation
time, get more system flexibility due to the flame retardancy rating, and cut down on materlol costs.
Basic Use:
CIB's primary function is as an insulation board for the construction of closed crawispaces (sealed crawl -
spaces, conditioned crawlspaces ... ). CIB is used where board stiffness properties are required and also
functions as an exterior insulation when covered with a weather barrier. CIB is used in exterior curtain walls,
Interior walls, floor /ceiling assemblies and as -an exterior insulation on HVAC ducts and plenums or In con-
structions where framing is not present. It is also used as thermal insulation on tanks and vessels,
Benefits:
CIB provides high sound absorption and excellent thermal performance, The product can be easily cut,
handled, fabricated and installed. CIB Is UL listed. For more benefits as compared to other products see the
attached sheet CIB vs Polyisocyanurate Insulation.
Composition and Materials:
The product is composed of glass fibers bonded together with a thermoset binder.
Limitations:
Insulation should be kept clean and dry at all times.
Technical Data
_ CIB Tech Data
.Physical Properties
Thermal
Resistance
Sound Absorption Coefficients @ Frequency (Hz)
Thickness
Density
R Value
125
250`
500
1.000
2000, `.
4000
NRC
2.5 in
1.66
11
0.13
0.77
1.12
1.09
1.04 : 04
1
The Information and moommandations discussed in this publication ore believed to be correct. Flowerer, this should not be accepted as a CIB
guarantee of their accuracy, and confirming test should be run in yarn own plant or laboratory. Nostalement should be construadasarecomme.. Issuc:A
elation for any use, which would violate any patent rights. Nothing contained herein shalt constitute a warronly with respact to the products Revlslon 1
described or their use. Dole: loll 1106
Feb 11 2008 9:15AM HP LASERJET FAX p.2
•i!r `
s
•
r
2034 -C Van Buren Ave. • Indian Trail, NC 28079 • Phone: 704,334.8222
Applicable Standards
•.Model Building Codes:
- (BOCA, ICBO. SBCCI, CABO, ICC)
- New York City
MEP. 35 -79 -M
- California Quality Standards.
Rea, No. CA -TO24 (PA)
- City of Los Angeles, RR 8148
• mwerlal Standards:
- (ASTM C 553)
CS 150, Type I, II & III
- (ASTM C 612)
CB 150 & CB 225, Type IA
CB 300 & C9 600, Types IA & 18
- (CAN /CGS B- 51.10 -92)
CB 150 & CB 225, Type 11, Class II
CB 300 & C8 600. Types L Class II
Fire Resistance:
• Fite Hazard Ciassificotion:
-(ASTM E 84, UL 723. NFPA 255)
- (CAN /ULC- 5102 -M88)
Mox. Ram Spread Index: 25
Max Smoke Developed Index; 50
• Limited Combustible:
-(NFPA 259)
7 3,500 Btu /ib
Physical /Chemical Properties:
• Thermal Performance:
- (ASTM C 177 or ASTM C 518)
See cr/aiioble size table.
• Acoustical Performance:
- (ASTM C 423)
See table below.
• Operating Limits:
- Temperature: (ASTM C 411)
Max. 250•F (121•C) (Faced)
Max. 450 (232 'C) (Unfaced)
• Water Vapor Permeonce:
- (ASTM E 96, Dessiccm' Method)
Max 0.02perms
(1 15 x 10 -9 g /Pa -s -m2)
(AW & FSK Facing)
• Water Vapor sorptiQIKi
- (ASTM C 1104) {'
7 3% by weight
• Corrosiveness: ( AST M C 665) .
- Pass
• Fungi Resistance. ( fiV C 1338)
- Pass F'
Installation:
Exterior Walls - Install a vapor barrier towards the
interior side of the structure, except in warm and
humid areas where local code regulations may
require a vapor retarder to face toward the exterior.
Curto Walls - CIS is applied to spandrel and
precast concrete panels with approved adhesives or
mechanical fasteners. Boards may also be installed
using hat channels orZ studs. Where a vapor retarder
Is required, all joints, seams and penetrations shall be
sealed. Exterior applications require the Insulation to
be covered with appropriate weather barrier finish,
Choice of finish depends on mechanical abuse,
weather exposure, and appearance requirements.
HVACIMechonical - All fabrication, application and
installation steps should be in accordance with the
requirements of the National Commercial and Indus-
trial Installation Standards (current edition) published
by the Midwest Insulation Contractors Association
(MICA).
These installation recommendations are general in
notutq Other methods are acceptable. Please
eonsUl your +tractor or DryDog Barriers for recom-
mendations bo�s't suited to the applications.
Maintliilavna;e: :,: ,
An inspection algid preventative m enance
program for theInsufation and vapor 0 sysiem
is recom der m' # men 4o ensure optimum eir'&t nce,
-140hrttt at`services:
T6chnloal assistance can be old #olll F from
into @dryd og barriers.com.
,
• Odor Emission: (ASTN-tr 1304)
4
-Pass
3J
"1i
Quality Assurance:'`;
ClB is manutociurea according to ISO 9000 standaR� d
The lrvfcrrnciflon and rscomm"dations discussedin this publication are believed to be correct. However, Me should not beocc*ptedasapuaronr
CIA
tee of Moir acomacy, and confirming bet should be run in your own plant at laboratory. No statement should be *one trued as a recommendation
Issue. A
for any use, which would violate any patent rights. Nothing eontaYsed herein shell constitute a warranty with repeat to the products described or
Revision. I
thole use.
Date 1011/05